<?xml version="1.0"?>
<Articles JournalTitle="Journal of Air Pollution and Health">
  <Article>
    <Journal>
      <PublisherName>Tehran University of Medical Sciences</PublisherName>
      <JournalTitle>Journal of Air Pollution and Health</JournalTitle>
      <Issn>2476-3071</Issn>
      <Volume>8</Volume>
      <Issue>1</Issue>
      <PubDate PubStatus="epublish">
        <Year>2023</Year>
        <Month>02</Month>
        <Day>26</Day>
      </PubDate>
    </Journal>
    <title locale="en_US">Carbon dioxide capture from combustion gases in residential building by  microalgae cultivation</title>
    <FirstPage>13</FirstPage>
    <LastPage>22</LastPage>
    <AuthorList>
      <Author>
        <FirstName>Ramazan Ali</FirstName>
        <LastName>Dianati Tilaki</LastName>
        <affiliation locale="en_US">Department of Environmental Health, Faculty of Health, Mazandaran University of Medical Sciences, Sari, Iran</affiliation>
      </Author>
      <Author>
        <FirstName>Morteza</FirstName>
        <LastName>Jafarsalehi</LastName>
        <affiliation locale="en_US">Department of Environmental Health, Faculty of Health, Kashan University of Medical Sciences, Kashan, Iran</affiliation>
      </Author>
    </AuthorList>
    <History>
      <PubDate PubStatus="received">
        <Year>2022</Year>
        <Month>04</Month>
        <Day>19</Day>
      </PubDate>
      <PubDate PubStatus="accepted">
        <Year>2023</Year>
        <Month>01</Month>
        <Day>16</Day>
      </PubDate>
    </History>
    <abstract locale="en_US">Introduction: Global warming and the need to reduce greenhouse gas emissions from various emission sectors are not hidden from anyone. The aim of this study was to determine Carbon dioxide (CO2)capture 
from combustion gases of methane for cultivation of microalgae spirulina platensis. 
Materials and methods: Microalgae culture medium was added in two photobioreactor. Air and combustion gas was injected into control and test reactors respectively. Artificial light with 10 Klux intensity was used and 
operated in continuous and intermittent (14 h ON and 8 h OFF) modes. Inlet concentration of carbon dioxide in to the test photobiorector was set in the range of 2000 to 6000 ppm and was measured in the inlet and outlet of 
photo-bioreactor by ND-IR CO2&#xA0;analyzer. 
Results: In the control photo-bioreactor, the average removal of CO2 from the air was 42%. In the test reactor with an inlet CO2&#xA0;concentration of 4100 ppm, the average removal of CO2&#xA0;from the combustion gas was 23%. After 9 days of cultivation, the amount of carbon dioxide stabilized by microalgae was 0.528 and 1.14 g/L (dry weight) in the control and experimental photobioreactors respectively. The CO2 bio-fixation rate was in the range of 2.2% and 4.0% at different runs. After 9.0 days of cultivation concentration of microalgae was 0.25 and 1.0 g/L in the control and test reactors respectively. Algae productivity with intermittent light was 35% less than continuous light exposure. 
Conclusion: It is possible to use CO2&#xA0;capture from combustion gases of commercial heater for cultivation of microalgae spirulina.</abstract>
    <web_url>https://japh.tums.ac.ir/index.php/japh/article/view/375</web_url>
    <pdf_url>https://japh.tums.ac.ir/index.php/japh/article/download/375/334</pdf_url>
  </Article>
</Articles>
